(1) Subdivision monuments shall be installed by the Subdivider's land surveyor at such points designated on the Final Plat as approved by the City Engineer. Standard precast monuments must be placed prior to the release of the improvement bonds.

(2) Rebar five-eighths inch in diameter and 24 inches in length, with numbered surveyor's cap, shall be located in the ground, flush at finished Grade and at all Lot corners, and off-set pins are to be placed in the back of curb.

(3) All monuments shall be certified by the Subdivider's land surveyor as accurate.

(4) It is unlawful for any Person to install Survey Monuments having a spatial relationship with any section or quarter section corner without first obtaining from the Salt Lake County Surveyor's Office a monument permit for such installation. All Survey Monuments installed shall be in accordance with the permit issued and shall be subject to inspection and approval by the Salt Lake County Surveyor's Office.