Skip to main content
Loading…
This section is included in your selections.

In reviewing the construction and siting of homes in an approved Subdivision, variation in exterior design and setback distance shall be required as necessary to satisfy the purpose of this Chapter as outlined below:

(1) In order to insure variation in Front Yard setbacks, no more than two homes on adjacent Lots shall be built at the same setback. The minimum front setback may be reduced for main Buildings, but not for garages; however, the average front setback for all Lots in the Subdivision shall not be less than the minimum front setback allowed in the zone. The minimum offset between homes shall be not less than five feet and the minimum front setback on any Lot shall be not less than 23 feet. This requirement shall not apply to Lots where the entire front property line is a curve with a radius of 100 feet or less. This subsection (1) shall not apply in the RE zone.

(2) Any sides of a home facing a Street, consisting of one material, shall include relief in the form of a cantilevered area, foundation jog, or other pop-out.

(Ord. No. 21-42 Renumbered 07/06/2021. Formerly 7-11-207)